ÛÛÛ ÜÛÛÛÛÛÛÜ ÜÛÛÛÛÛÛÛÜ TM ÛÛÛ ÜÛÛÛß ßÛÛÛ ÛÛÛß ßÛÛÛ ÛÛÛ ÛÛÛ ÜÜÛÛÛß ÛÛÛ ßÛÛÛÜ ÜÛÛÛ ÜÛÛÛß ÛÛÛ ßÛÛÛÛÛÛß ÜÛÛÛÛÛÛÛÛÛÛ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ TOTAL CONTACT MANAGEMENT ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Version 2.01 Copyright (c) 1992-1994 CreatiVision Publishing Corp. All rights are reserved. CreatiVision Publishing Corp. P.O. Box 5523 Arlington, TX 76005-5523 Inet: cvpsupport@aol.com PROGRAM INFORMATION ------------------- IC2 is a professional-oriented contact manager for Windows 3.1 running in standard or enhanced modes with at least 2MB of memory. It can be run on a network and we recommend you call for our multiuser manager pack for serious file sharing. (Distributors, please read on to the suggested descriptions below) GETTING STARTED --------------- Welcome to IC2! To install, follow these directions: 1. Copy the IC2 program files to your hard drive, or you can install the program from your floppy drive. 2. Make sure that the file VBRUN300.DLL is either: A. In the same place as the IC2 program files, -or- B. In your Windows SYSTEM directory, where it can be shared with any other Visual Basic Application. 3. From Windows, run the program SETUP.EXE (from Program Manager select the "Run..." option from the File menu) 4. Follow the instructions in the install program. It will allow you to either install to a new directory (i.e. from a diskette) or will just configure in the current location (if you have already copied the files to your hard disk). It will even create a Program Manager group for you if you wish. TECHNICAL SUPPORT ----------------- If you encounter a problem while using IC2 that is not covered in the Help file, you will probably need to contact us for user support. Our support policies are as follows: First, make sure IC2 is causing the problem: A. Check your Windows configuration B. Check your printer and print configuration C. Try closing any other applications that may also be running and try InContact again D. Reboot your computer and see if the problem still occurs If none of these produce results, try using the Help file to locate information about the task you are trying to perform. This program requires a basic knowledge of Windows. If you are not familiar with Windows, please do not contact us unless you're certain the problem you're having is related to IC2! If all else fails, you may receive technical support with one of the following methods: A. Mail us a letter at: CreatiVision Publishing Technical Support P.O. Box 5523 Arlington, TX 76005-5523 B. Use EMAIL: CompuServe - 70404,3014 AOL - CVPSupport Internet - cvpsupport@aol.com C. Call or fax us at: Voice - 817/656-5970 (Hours: M-F, 9-5 CST) Fax - 817/656-7794 When contacting us we need the following information: 1. The make and model of your computer 2. The type of display 3. The version number of Windows you are running 4. The amount of memory your machine has 5. A detailed account of what you did when using IC2 and what happened from your view. NOTICE: We reserve the right to decline technical support to any unregistered user in order to better serve our registered customers. LICENSE INFORMATION ------------------- As an unregistered user you are granted a limited license period of 15 days for a free evaluation of this product. If you continue to use IC2 after that point you must register the program. If you do not register you must discontinue its use. If you choose to register IC2 you will be granted a permanent license on the copy you are currently using. We also offer a professionally printed User's Guide. In addition, we provide all users with unlimited technical support over the phone. Registration of IC2 is $49 plus $4.95 S&H ($15.00 outside the US). Please send a check or money order in US funds for the appropriate amount, made out to "CreatiVision Publishing". We also accept orders by phone or fax if you wish to use your VISA or MASTERCARD to register. In all cases, we ask that you use the order form provided in the program. If you cannot use the order form provided, please be sure to include all information requested on the order form. *** Site Licenses and Volume Discounts are also available *** REGISTRATION ------------ 1. Register directly with CreatiVision Publishing: Send the following: * A completed, printed order form -or- a valid purchase order from your company. Specify diskette size (high density only) when ordering. * A check or money order in U.S. funds for the registration amount PLUS: U.S. Resident Texas Resident Outside U.S. -------------- --------------- ------------ $4.95 S/H $2.90 S/H+TAX $15.00 S/H * Any comments or suggestions To: CreatiVision Publishing P.O. Box 5523 Arlington, TX 76005-5523 NOTE: To make ordering easier, you can try filling out the automated order form which you can pull up by selecting "Print an Order Form" from the Help Menu in IC2. 2. Register ONLINE with Compuserve: If you elect to register via CompuServe you will be charged $49 for IC2, plus a flat $15 shipping charge since we cannot specify domestic or international shipping rates. International users may find this option most desireable since they may find it easier to pay for registration in this manner. The Registration ID for IC2 is: 404 3. Use a CREDIT CARD to register: We also accept VISA and MASTERCARD as payment for your registration. We ask that you use the order form provided by accessing the "Print an Order Form" selection on the Help menu. This insures that all information required by us will be presented with your order. You may either mail or fax this form to us, or have the information ready when you contact us by phone. Our phone number is: 817/656-5970 Our fax number is: 817/656-7794 We hope that you elect to register and continue to use IC2. If you have any questions or comments, feel free to drop us a letter (at our address above), call or leave email to: CompuServe: 70404,3014 AOL: CVPSupport Internet: cvpsupport@aol.com DISTRIBUTOR INFORMATION ----------------------- IC2 is shareware and as such, anyone is permitted to give copies to friends or associates. However, if you are a distributor of shareware products, we ask that you read the following text BEFORE distribution. PROGRAM DESCRIPTIONS -------------------- One-Liner: Total contact manager for Windows Long Blurb: IC2 Ver 2.01 - Total Contact Manager for Windows. Includes time manager, network compatibility, autodialer, custom fields, display options, & up to 32K of notes per contact. Design your own labels, reports, and form ltrs. Plus many other features! Requires Windows 3.1 & VBRUN300.DLL. DISTRIBUTION ------------ We encourage distribution of IC2 but we ask that you follow these guidelines so that we can both serve our customers better: 1. You must have written confirmation of our permission to distribute the program and/or collect any registration fees for it (Call us & we'll send it). BBS' and online services may distribute WITHOUT permission and are exempt from #4 and #5. No distributor or BBS may accept registration fees on our behalf unless they have made arrangements with us. 2. We ask that you please run our SETUP.EXE when creating an install utility for our program. We get many calls from users who used your install and still can't run the program. Our Setup must be run to configure the program and create a program group. You are welcome to run our Setup after your own utility. In addition, this program REQUIRES VBRUN300.DLL which is the Microsoft runtime module for Visual Basic. This file is freely distributable and is readily available from a variety of sources. If you received a copy of IC2 directly from CVP, we have included a copy of this DLL. If your shareware library has VBRUN300.DLL, feel free to use it instead of the copy we sent. 3. You may NOT sell IC2 as (or included with) a COMMERCIAL or RETAIL product WITHOUT OUR WRITTEN CONSENT. 4. Do not include IC2 as part of a shareware package UNLESS the other items in the package are augmentive utilities for (or relating to) our application (for large collections like CD-ROMS, please get our permission). 5. If you have a rating system and your reviews deem IC2 as average or below overall, please don't bother distributing it. We don't have an ego problem, we just don't want to waste your time. 6. Sing our praises (OK, this is optional, but it would be great!) CREDITS ------- IC2 is Copyright(C)1992-1994 CreatiVision Publishing, all rights are reserved. Written by David Balmer, Jr. IC2 was written in Visual Basic v3.0 for the 100% IBM AT-compatible computer running a 286 (or higher) with at least 2meg of memory under Windows Version 3.1 in normal or enhanced modes. TRADEMARKS ---------- IC2 is TM CreatiVision Publishing; Windows and Visual Basic are (R)(C) Microsoft Corp.; IBM is (R) International Business Machines Corp. DISCLAIMER, COPYRIGHT NOTICE ---------------------------- In no event will CreatiVision Publishing be liable to you for any damages, lost profits, lost savings, or any other incidental or consequential damages arising out of the use or inability to use this software, even if CreatiVision Publishing has been advised of the possibility of such damages, or for any claim by any other party. This product is freely distributed as shareware with a 15-day trial license before purchase. All copyrights on the name, look-and-feel and operations are strictly enforceable. It is illegal to change any text within the program code that would remove the copyright notice for CreatiVision Publishing. It is also illegal to change ordering information text in the program or to distort in any way the identity of the rightful copyright holder.